How to fix the cargo in transport?

Transport safety depends on many factors. Even the best driver on the best vehicle will not be able to deliver the goods to the destination in full if the cargo is not properly prepared for transportation. In order to avoid damage caused, for example, due to uncontrolled movement of cargo during movement, numerous protective equipment is used. Why should the cargo be protected from transportation?
Sudden braking, changing the direction of movement or acceleration is caused by huge forces acting on the load on the trolley of the truck trolley - the greater the weight of this cargo and the greater the change in motion parameters. If such a load is not properly protected from uncontrolled sliding, this can lead to a loss of controllability and, as a result, to serious accidents with the participation of other road users.
To fix objects in the cargo compartment, various means are used. One of them is grids of synthetic fibers. With their help, you can not only limit the movement of cargo during movement, but also divide the cargo space into separate sections, each of which has a different purpose. Networks are suitable for fastening goods that cannot be fixed with belts, as they can be damaged in case of greater overload. The aforementioned belts are the second most common product - thanks to them, you can “hard” the cargo inside the vehicle, effectively limiting its movement. This solution is especially often used in the transportation of heavy cargo, for example, pallets with building materials. Additional protection can provide anti -slip mats, which are used to cover the floor of the cargo compartment - they significantly increase friction and prevent the loading of the load. Cargo fastening.
The cargo can be fixed in a car in several ways. The first is the method of shaping, which consists in adjusting the cargo to the form of cargo space so that the restrictions of the space prevented the movement of products. If this is not possible, fasteners and other auxiliary products are used. In the power method, in turn, the cargo is pressed to the ground with auxiliary means, so that the potential force of friction increases significantly and thereby prevents the displacement of cargo. The combined method is based on the simultaneous use of decisions of the form and strength method. sex.prostitutki72.com